JDZX10-10_6R2 voltage transformer
JDZX10-10, 6R2 voltage transformer is a fully enclosed product with a fuse casted by epoxy resin at one time, with a contact arm at one time, no wiring is required at one time, and the voltage is switched on and off directly through the contact terminal.
product description :
JDZX10-10, 6R2 voltage transformer is a fully enclosed product with a fuse casted by epoxy resin at one time, with a contact arm at one time, no wiring is required at one time, and the voltage is switched on and off directly through the contact terminal. It is suitable for voltage, energy measurement and relay protection in power systems with rated frequency of 50-60HZ and rated voltage of 10KV and below. This product replaces the combination of two or three single mutual inductors at the same time, and the wiring is convenient and reliable. It is especially suitable for the installation and use of handcart-type switch cabinets.
Introduction to product structure ：
JDZX10-10, 6R2 voltage transformer is a pillar structure, which is fully enclosed and vacuum poured with epoxy resin, and the transformer has good pollution resistance and moisture resistance.
The biggest feature of JDZX10-10, 6R2 voltage transformer is that it has fuse protection at one time, which can avoid the trouble caused by fuse configuration. Its small size and light weight can greatly reduce the effective space of the switch cabinet, and the fuse is easy to replace. There is a pull wire protection terminal box at the secondary terminal, which is convenient for wiring and can realize anti-theft measures.
technical parameter :
The current transformers are in accordance with GB/T20840.1、3 and 1EC61869-1、3standards
Rated insulation level 12/42/75、7.2/32/60kV
Rated frequency 50Hz or 60Hz
Note:1. I the required parameter is beyond the above range, it can be discussed and confirmed with us.
2.Type of the matched fuse is XRNPC J-120.5A, 50kA.
outline dimension drawing :
Zhejiang Brwor Electric Co.. Ltd. was established in 2005, located in Yueqing city, Zhejiang province, China. There is 30 kilometers from Wenzhou airport.
Brwor is specialized in medium Voltage Electrical Equipment, as like C-GIS switchgear, solid insulated ring network cabinet, vacuum circuit breaker, load switches, and others core unit of ring main unit related.
Browr covers an area of 11.565 square meters, with a building area of 11.000 square meters, which is domestic key research and development and manufacturing of high-tech middle voltage switchgear enterprise. The new plant with 33335 square meters will put into use in the ending of 2022. And we have installations of more than 270,000 C-GIS switchgear all over the world(since now main market China).
We make per key part of RUM in our factory and have strict QC process. The process of QC as follows:
Incoming inspection – inspection – process inspection – quality inspection – delivery inspection. There is inspection records for each accessory and contract product,easy inquiry.
Contact with us by email or whatsApp, and inform us the requirements. T/T is optimized, we aks for advance payment and balance should be paid off before shipping usually. L/C is available.
Min. order is 1 set.
RMU is custom made product, we will according to your requirements to make it. The technical question will referred.
Annual output 20,000 units.
we have installations of more than 270,000 C-GIS switchgear all over the world(since now main market China) since 2022 May.
Sea shipping usually. But parts also recommend air shipping in case of urgency.
There are Wenzhou or Ningbo or Shanghai port near our city and will arrange loading after order finish then.
The warranty period is 24 months. “three guarantees policy”,Guaranteed repair, replacement and return due to quality proble.Exceeding the guarantees period, we provide maintenance accessories with discount .After received a request ,we will make a response within 12 hours.In case of overseas after-sales service, we will borne the domestic charge, the foreign part shall be borne by customer (including but not limited to visa, accommodation, travel expenses, staff salary etc.)
The main products are 10/33KV RMU.
Now we have an area of 11.565 square meters plant,and the new plant with 33335 square meters will put into use in the ending of 2022.The number of employees is around 180.
The lead time is 10-25days usually.
We keep kep parts of semi-finished products of RMU in stock usually.
With the progress and development of modern society, BWV-12-630-25 air-break technology has been widely used. However, there are still some …
To safely use good electrical equipment, can not be separated from the protection of safety devices. Electrical equipment safety device …
The CGIS1580 current transformer is a high-quality product that is perfect for a wide range of applications. Its compact size and low weight make it easy to install, and its accuracy and precision ensure reliable performance.