JSZV6-10_6R voltage transformer
JSZV6-10, 6R voltage transformer adopts epoxy resin casting fully enclosed structure. JSZV6-10, 6R voltage transformer is composed of two fully insulated voltage transformers to form “V” type wiring, the primary winding is protected by fuses, the secondary output is 100V for measurement use, and there are 110V and 220V output voltage terminals for operation. power supply to the drive mechanism.
product structure :
JSZV6-10, 6R voltage transformer adopts epoxy resin casting fully enclosed structure. JSZV6-10, 6R voltage transformer is composed of two fully insulated voltage transformers to form “V” type wiring, the primary winding is protected by a fuse, the secondary output is 100V for measurement use, and there are 110V and 220V output voltage terminals for operation. power supply to the drive mechanism. The power capacity is 1100VA. The fuse is installed inside the primary terminal. JSZV6-10, 6R voltage transformer is made of two single-phase voltage transformers with fuses respectively cast as a whole, and the primary terminal and the secondary terminal are drawn out respectively.
Users can connect V-type three-phase voltage transformers according to their needs, or they can use two sets alone without affecting each other. The fuse is installed inside the primary terminal. When replacing, in the event of a power failure, there is no need to remove the primary external wiring, which is very convenient and fast. The normal product secondary output is 100V. It can also have 110V and 220V control power supply according to the needs, and the power supply capacity is 1100VA.
technical parameter :
The current transformers are in accordance with GB/T20840.1. 3 and IEC61869-1. 3standards
Rated insulation level 12/42/75、7.2/32/60kV
Rated frequency 50Hz or 60Hz
Note: 1.Jf the required parameter is beyond the above range, it can be discussed and confirmed with us.
2.Type of the matched fuse is XRNP □-12, 0.2A. 50kA.
A voltage transformer is a transformer with an iron core. It is mainly composed of primary and secondary coils, iron cores and insulation. When a voltage U1 is applied to the primary winding, a magnetic flux φ is generated in the iron core. According to the law of electromagnetic induction, a secondary voltage U2 is generated in the secondary winding. By changing the number of turns of the primary or secondary winding, different ratios of primary voltage and secondary voltage can be generated, which can form voltage transformers with different ratios.
The voltage transformer converts high voltage into low voltage proportionally, that is, 100V. The primary side of the voltage transformer is connected to the primary system, and the secondary side is connected to measuring instruments, relay protection, etc.; it is mainly electromagnetic (capacitive voltage transformer application Wide range), and other non-electromagnetic, such as electronic, photoelectric.
outline dimension drawing：
Zhejiang Brwor Electric Co.. Ltd. was established in 2005, located in Yueqing city, Zhejiang province, China. There is 30 kilometers from Wenzhou airport.
Brwor is specialized in medium Voltage Electrical Equipment, as like C-GIS switchgear, solid insulated ring network cabinet, vacuum circuit breaker, load switches, and others core unit of ring main unit related.
Browr covers an area of 11.565 square meters, with a building area of 11.000 square meters, which is domestic key research and development and manufacturing of high-tech middle voltage switchgear enterprise. The new plant with 33335 square meters will put into use in the ending of 2022. And we have installations of more than 270,000 C-GIS switchgear all over the world(since now main market China).
We make per key part of RUM in our factory and have strict QC process. The process of QC as follows:
Incoming inspection – inspection – process inspection – quality inspection – delivery inspection. There is inspection records for each accessory and contract product,easy inquiry.
Contact with us by email or whatsApp, and inform us the requirements. T/T is optimized, we aks for advance payment and balance should be paid off before shipping usually. L/C is available.
Min. order is 1 set.
RMU is custom made product, we will according to your requirements to make it. The technical question will referred.
Annual output 20,000 units.
we have installations of more than 270,000 C-GIS switchgear all over the world(since now main market China) since 2022 May.
Sea shipping usually. But parts also recommend air shipping in case of urgency.
There are Wenzhou or Ningbo or Shanghai port near our city and will arrange loading after order finish then.
The warranty period is 24 months. “three guarantees policy”,Guaranteed repair, replacement and return due to quality proble.Exceeding the guarantees period, we provide maintenance accessories with discount .After received a request ,we will make a response within 12 hours.In case of overseas after-sales service, we will borne the domestic charge, the foreign part shall be borne by customer (including but not limited to visa, accommodation, travel expenses, staff salary etc.)
The main products are 10/33KV RMU.
Now we have an area of 11.565 square meters plant,and the new plant with 33335 square meters will put into use in the ending of 2022.The number of employees is around 180.
The lead time is 10-25days usually.
We keep kep parts of semi-finished products of RMU in stock usually.
The CGIS1580 current transformer is a high-quality product that is perfect for a wide range of applications. Its compact size and low weight make it easy to install, and its accuracy and precision ensure reliable performance.
11kv vacuum circuit breakers can be expensive, depending on the features and capabilities you need. You can expect to pay anywhere from $1,000 to $10,000 for a quality breaker. Be sure to work with a trusted supplier to get the best price and selection.
An SF6 Gas Insulated Ring Main Unit (RMU) is a type of electrical switchgear that uses sulfur hexafluoride (SF6) gas as an insulator. The SF6 gas is contained within a sealed chamber, and the electrical components of the RMU, such as the switchgear and circuit breaker, are also enclosed within this chamber. The use of SF6 gas as an insulator allows for a compact and lightweight design, which makes it ideal for use in restricted spaces and for underground applications.